I don't know for sure this is related to your situation or not, but I've
1. the domain is configured with 2 or more domain controllers
2. all domain controllers are shut down
3. one domain controller (e.g. the one configured with the FSMO roles) is
message displayed for a long time - like minutes.
exhibit this problem when they are starting up.
It is perfectly useless to know the right answer to the wrong question.
Post by Sam PeterPost by SpinExperts,
Running Windows Server 2003 (enabled as a Domain Controller and running
AD-integrated DNS) as a guest OS inside of Virtual Server 2005 R2. The VM
always stalls for five minutes at the "Preparing Network Connections" screen
before it finally gets to the Logon dialog screen. I know the number one
cause of this issue - mis-configured DNS settings. However, this VM points
to itself for it's preferred DNS server under TCP/IP properties and the
network adapter is set to "Internal Network". Is there something I need to
look at to make the "Preparing Network Connections" process faster? The
host OS is Windows XP SP2 Media Center Edition running on a brand-new Sony
VAIO VGN-AX570G Notebook computer, Pentium M CPU, Intel 915 PM chipset.
--
Spin
HI all.
After getting crazy for fours months here the solution to save you some pain.
http://techrepublic.com.com/5208-11184-0.html?forumID=47&threadID=197152&messageID=2311170
Once I've fould out that the workstation service was slowing the all start
up / login process with windows XP.
Here I am posting some considerations.
First the problem appear as a very slow login after typing your passord
prior the desktop to appear.
The problem also appeared as an infinite need to repair continuously the
connection (right clicking on the wireless icon) or often as inability to
connect wirelessly.
The SOLUTION to the problem "login to XP takes forever" is to remove any
other software that manages the wireless card and let only the native
Windows
Wireless Zero Configuration to handle it but the problem immediately desappear!!!.
Once you unistall any other software excepts the drivers of the wireless
card, you must go on control panel/network
connections/advanced/general/properties/wirelss network and click on Use
Windows to configure my wireless network settings which will anable the
native Windows Wireless Zero Configuration.
The problem is probably found in many computer that have the intel
centrino chip set which uses the Intel(R) PRO/Wireless 3945ABG Network
Connection but
maybe is with any other wireless
card that uses the intel software to manage.
Myself I did also utilize a second D-Link wireless card which was also
utilizing its own software to manage and could work with the native
Wireless Zero
Configuration) but it turned out because of the Intel(R) PRO/Wireless manager.
Myself just to be safe I unistalled also the D-Link softwarebut is not really necessary.
THE PROBLEM DID NOT IMMEDIATELY GO AWAY!
1)
I had to reinstall (from an image I had) the entire operating system and
then remove the Intel Wirelss manager from it.If I was not removing the
Intel SW
the problem after few hours the problem reappeared (I restored the OS from
the image like 30 times so I am certain).
For many people the problem will go away immediately just unistalling the
wirelss software but that was not my case.
If you do not want to uninstall the operating system.you may go through a
procedure to reset entirely the networking in your OS, I know there is a
way to
do it but I never researched it.
(Maybe all you need to do is to remove all network conncections by
uninsalling all drivers I chose to restart with a new XP)
2)
IF I DISABLE the wireless switch of my Intel card and connect the 2nd one,
the pc still says that there are network available on the 1st. In other
words
the card is not entirely off. I use a brand new DELL LATITUDE D820. Maybe
this is to avoid the Plug&Play procedure.
As result I see two wireless icons on the bottom right when I only want
one and altough the external DLINK says that is correctly connected to the
wireless network, Windows still seem to remain internally connected to
the Intel one and as result will still be unable to see a webpage.
In order to "connect" Windows to the correct external network card I must
click on its repair button (right click on its icon) and then everything
is
ok. Maybe this is another bug of the os which wouldn't come as a real surprise.
I hope this all note will be useful to you and save you a lot of time.
Good luck!
PS
If you find on the web that the prefetcher is the problem.. I think it is not true.
Posted via http://www.VirtualServerFaq.com - Brought to you by Business
Information Technology Shop - http://www.bitshop.com